This is a layout of the setup I have for my sauna:
From what I have calculated I will need about 2.2 cubic yards of cement.
That is based on :
8' x 1.5' x 1.5' = 18.00 cubic ft.
8' x 1.5' x 1.5' = 18.00 cubic ft.
9' x 1.5' x 1.5' = 20.25 cubic ft.
The space for this sauna is pretty centrally located on my property and I will probably be carrying in the cement for this and mixing it in a mixer with help from a friend.
This foundation will be supporting a cinderblock retaining wall that will be about 8' - 10' feet in the back and taper down as needed on the two sides.
Can I use Quickcrete for this application?
Am I better off buying bags of Portland cement / sand / aggregate and making my own mix?
How do I accurately calculate the amount of Quickcrete and or Cement/Sand/Aggregate mix I will need? (If I have done it wrong)
Any other suggestions or things I need to take into account would be appreciated! Thanks!
Source: http://www.diychatroom.com/f19/pouring-sauna-foundation-133554/
st nicholas st nicholas mindy mccready mindy mccready cliff harris cliff harris josh turner
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.